Fire wire Cable Installation
Attach the FIREWIRE-IDE cable’s “
MC 36 Connector
” to your Addonics
Pocket Drive firm and securely – you should not be able to disconnect the cable
without pressing the release notch.
Firewire Installation
For Win98SE, Me, Win2000 and XP
(Note for Win98SE only
: After plugging in the cable some system might
prompt you for Win98SE CD, in case you don’t have The Win98SE CD and the
wizard prompt you for
b.
NTMAP.SYS
please type
C:\WINDOWS\SYSTEM32\DRIVERS
c.
NTMAPHLP.PDR
please type
C:\WINDOWS\SYSTEM\IOSUBSYS
IF the system did not prompt you for anything just follow the steps below
)
1. Make sure the Firewire cable is securely attach from the back of the drive.
2. Make sure that power is attached and turned on.
3. Power on the system, on the Window Desktop, double click on the
MY COMPUTER icon.
4. Plug the Addonics 6 Pin FIREWIRE-IDE cable into your computer’s
FIREWIRE port.
5. Wait for a few seconds, your computer may blink for a moment.
6. Double Click on the “My Computer” icon if not open yet. Your Pocket
DVD/CDRW will appear as a CD drive icon. You are now ready to use the
DVD/CDRW Drive.
Note:
for computer that has a 4-pin firewire port, you will need to get a 6 to 4
pin Firewire adapter.
Addonics Technologies – Pocket CDRW Users Guide v4.0
8
