Drive Installation
Step 4.
On the Duplicator, move the silver button slightly to the right to open the door.
Step 5.
Insert the completed adapter into the drive bay with the SATA connector toward
the rear, metal side up. The drive should slide in easily, don't force it.
Step 6.
Close the door on the drive bay. It should also give little resistance, don't force it.
As soon as the drive is in position it will power up.
Phone: 408-453-6212
Email:
www.addonics.com/support/query/
2
Step 1.
Insert the mSATA SSD
into the mSATA connector on the
PCB.
Step 2.
Push down the other end
of the mSATA SSD until it is
latched securely by the hold
down clip.
NOTE: The completed flash drive
has the same dimension of a 9mm
2.5" HDD
Step 3.
Turn over the flash drive.