www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Installation
1. Slide your mSATA SSD into the adapter.
2. Install the adapter and card into the mounting bracket as shown.
3. Completed assembly is suitable for mounting the same way as
a 2.5” hard disk, including connector position and mounting taps.
Hot Swapping
This unit supports hot swapping (inserting or removing drives
while the drives are running and connected to a computer).
The eSATA controller on the computer must also support hot
swapping - be sure to confirm this before attempting to insert or
remove drives while the system is running.
Also be sure to practice the appropriate safe removal procedure
before proceeding. Failure to practice safe removal procedures
will result in loss or corruption of data.
