www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Press
ENT
to enter the following screen. Use the Up and Down buttons to confirm reset to factory
defaults.
Load Default
Config? Yes
Load Default
Ok
If Load Default OK, this will be displayed on the LCD as shown below.
Load Default
Press
ESC
to return to the main menu then use the
ENT
button to select. This function resets all
settings to their factory default. This function helps the system recover from errors caused by an
illegal operation.
11-07.Adv Setup
Load Default
Burn In
This function is used to burn test the system reliability.
11-09. Adv Setup
Burn In
Press
ENT
to enter the following screen.
Burn In Mode
Copy & Compare
Use the Up and Down buttons to choose Compare, Async Copy & Cmp and Async Compare, then
press
ENT
to confirm.
Copy HPA
If this function is set to "ON", the system will completely copy the data in a source HDD's host
protected area.
11-08. Adv Setup
Copy HPA
The default is "OFF". Use the
ENT
, Up and Down buttons to change this to "On".
