www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
13. Advanced Setup Menu
Allows changes to advanced default settings. Making changes to these settings is not
recommended.
13-01. UnderRun Protect
When set to ON, duplicator will protect against buffer underrun conditions while
burning targets. Default setting is ON.
13-02. Overburn
When set to ON, the duplicator will attempt to burn past physical limit of media for very
full discs. Caution: enabling Overburn may cause hardware damage to the duplicator.
13-03. Read Error Skip
When set to ON, duplicator will ignore read errors while reading the source disk during
Copy function. Data written to targets for sectors that caused read errors will be
unpredictable and the Compare function will show differences.
13-04. Format HDD
Prepares a hard disk for use with imaging and editing functions. This feature is not
supported for this duplicator.
13-05. Verify HDD
Confirms a hard disk is properly prepared for use with the imaging and editing
functions. This feature is not supported for this duplicator.
13-06. Burn-in
Repeats one of three tests a set number of times, or indefinitely: Test function, Erase &
Copy function (supports rewritable media only), and Compare function.
13-07. Update Firmware
Used to apply new firmware to the Duplicator subsystem. Insert a CD-RW disc
containing the new firmware and press ENT. The duplicator will search for the correct
file and apply it if found.
13-08. Compare Firmware
Used to confirm Duplicator subsystem's firmware matches a file. Insert a CD-RW disc
containing the firmware and press ENT. The duplicator will search for the correct file
and if found, compare its firmware against the file.
13-09. H/W Diagnostic
Performs a series of tests on the duplicator subsystem hardware.
13-10. Load Default
Changes all configuration settings to their default setting.
13-11. CD+G
When set to ON, enables copying of CD+G (Compact Disc + Graphics) formatted
media. Default setting is OFF.
13-12. ISRC & MCN
When set to ON, duplicator will copy ISRC and MCN encoding for Audio CDs. Default
setting is OFF.
13-13. USB Option
When set to ON, Main Menu Item 13 will become “USB Mode” and Advanced Setup
will become Main Menu item 14. This feature is not supported for this duplicator.
