www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Overview
Front View
Back View
Jumper Settings
Master
Slave
Cable Select
1
3
4
2
1. 44-pin IDE Connector
2. SATA Power and Data Connector
3. Master, Slave & Cable Select
Jumpers
4. Pin 1 Marker
NOTE:
To set the SATA hard drive as a Master Device when connected to an IDE channel,
do not install a jumper. As a Slave Device short the middle pins.
