M.2 PCIe
Users Manual
INTRODUCTION
REQUIRED TOOLS
& PREPARE
INSTALL DRIVES
To remove the M.2 SSD module
1. Shut down your NAS system.
2. Disconnect all cables from your NAS to prevent possible damage.
3. To avoid potential injury, ensure that the SSD and other NAS internal
system components have cooled before touching them.
4. Hold the SSD module and remove it from the slot.
5. Reconnect the LAN cable & power adapter and power on the system.
Note:
For the NAS SSD Cache type, it will have read only, write only, & read-write
type mode.
Read only: ≥ 1 x SSD.
When you set
as the read-only cache, only frequently
accessed data is stored in the cache to accelerate random read speeds.
Read-write : ≥ 2 x SSDs
set
as SSD cache for both read and write caching, accelerating
both read and write speeds.
It is better to have the same type and capacity for NAS cache SSD.
7