Bushing for
stabilisation, used
if necessary
The toilet seat also
fits the Balance
module system
Quick mount,
see page 11
Turn the pin bracket to fit the hole
distance of the toilet seat.
Then tighten the nuts.
Fit the protective caps.
If necessary, clean the product with a mild detergent and water. Disinfect if necessary.
Disassemble the entire product. The parts are washed clean with non-scratching detergent, rinsed
with water, and dried. Disinfect. Check all parts and replace in case of wear.
Toilet seat and lid are made of recycled wood fibre with a coated polyester coating. Metal fittings.
Toilet seat and lid are sent for incineration or recycling. Metal parts are recycled as metal.
Dimensional sketch (mm)
230
150-200
270
425-440
32
55
12
Cleaning
Reconditioning
Materials, environment, and recycling
