7
www.addi-data.com
When you click on the name of one of these systems, corresponding product information
such as IP address, MAC address and firmware version will be shown on the right side of
the main window.
To scan the connected systems once again, for example after connecting another
MSX-E system, you have to click on the green icon in the top right of the ConfigTools
Explorer area.
Below the “Product Information” area, there are buttons that enable you to perform
various actions and to access the web interface of your MSX-E system.
The following actions are possible:
-
IP Address:
Change the IP address of the MSX-E system in order to adapt it, for
example, to your corporate network
-
Web Interface:
Access the web interface of your MSX-E system and change the
configuration
-
Save General Configuration:
Save the general configuration of the MSX-E system
(including, for example, the network configuration), i.e. all the settings defined on the
web interface apart from the I/O configuration.
-
Load General Configuration:
Load a file containing the general configuration of the
MSX-E system.
-
Save I/O Configuration:
Save all function-specific settings defined on the web
interface under “I/O Configuration”
-
Load I/O Configuration:
Load a function-specific configuration
