Mounting and connection
MSX-Exxxx
1.3.1
Ethernet ports
In order to access the MSX-E system, you have to connect one of the Ethernet interfaces (Port 0 or
Port 1) to your PC. For this, you can use a
CMX-6x
cable.
To cascade the MSX-E systems with one another, you need a
CMX-7x
cable.
The LED display “Port 0 ACT/Link” or “Port 1 ACT/Link” gives you information on the status of the
corresponding interface. For more details, see Chapter 1.6.1.
NOTICE!
The LED display only works if the MSX-E system is connected to
the voltage supply.
Table 1-1: Pin assignment: Ethernet ports 0 and 1
Ethernet Port 0
Ethernet Port 1 Cable (green)
Pin No.
Female connector,
D-coded, M12
Female connector,
D-coded, M12
Lead colour
1 TD0+
TD1+ yellow
2
RD0+
RD1+
white
3 TD0-
TD1- orange
4
RD0-
RD1-
blue
www.addi-data.com 14
