Addi-Data ADDIALOG APCI-3504, Техническое описание

Страница: 23 / 33

APCI-3504 Software
Buttons:
Edit:
Selection of the highlighted board with the different parameters set in the
text boxes.
Set:
Sets the parametered board configuration. The configuration should be set
before you save it.
Cancel:
Reactivates the former parameters of the saved configuration.
Default:
Sets the standard parameters of the board.
More information (not available for the boards with ADDIPACK)
You can change the board specific parameters like the identifier string, the
COM number, the operating mode of a communication board, etc...
If your board does not support these information, you cannot activate this
button.
ADDIDriver Board Manager:
Under Edit/ADDIDriver Board Manager you can check or change the
current settings of the board set through the ADDEVICE Manager.
ADDevice Manager starts and displays a list of all resources available for
the virtual board.
Test registration:
Controls if there is a conflict between the board and other devices installed
in the PC. A message indicates the parameter which has generated the
conflict. If no conflict has occurred, "Test of device registration OK" is
displayed.
Deinstall registration:
Deinstalls the registrations of all boards listed in the table and deletes the
entries of the boards in the Windows Registry.
Print registration:
Prints the registration parameter on your standard printer.
Quit:
Quits the ADDIREG program.
23