ADDER X-KVM/P, Инструкция по установке и использованию, Страница: 25 / 57

AdderLink X-Series Installation and Use Page 23
Press
g
to select no video compensation.
You should now see a ‘fuzzy’ video picture on your monitor connected to the remote
receiver unit.
STEP 3
You may now use the following keys to select the required video compensation.
g
Selects no video compensation.
{
Increases video compensation to sharpen picture (coarse adjustment).
w
Increases video compensation to sharpen picture (fine adjustment).
}
Decreases the video compensation (coarse adjustment).
y
Decreases the video compensation (fine adjustment).
Various other keys may also be used to select operating options (see section 2.10)
As you change the video compensation setting you will see the sharpness of the
picture change. The X-KVM calculates the required brightness automatically. You
will need more video compensation for longer twisted pair cable distances. Adjust
the video compensation until you achieve the best picture. If you add too much
compensation then the picture may be lost. If this happens reduce the compensation
to restore the picture.