ADDER Link X-KVM/P, Инструкция по установке и эксплуатации, Страница: 17 / 57

AdderLink X-Series Installation and Use Page 15
The X-KVM is now ready for use and will start to operate as soon the local and
remote units are both powered on. There is no requirement to switch the X-KVM
units on in any defined order. The X-KVM local unit draws its power from the
connected computer via the keyboard cable. However, if you are connecting to a
computer using cables that are longer than 5 metres or are connecting to a lower
powered device, such as some types of keyboard/video/mouse switch, an optional
power adapter may be required. When using the optional power adapter, ensure
that it is connected to the mains and powering the X-KVM before you switch on the
connected computers. Under these circumstances, failure to switch the X-KVM and
computers on in the correct order can lead to the mouse and/or keyboard not being
recognised by the computers when they are switched on.