ADDER ADDERView Secure AVS-1124, Руководство пользователя

Страница: 12 / 25

11
INST
ALLA
TION
CONFIGURA
TION
OPERA
TION
FUR
THER
INFORMA
TION
INDEX
Configuration
INITIAL DISPLAY SETUP
The secure multi-viewer switch defaults to an output resolution of 3840 x 2160. If you
are using a display which only supports smaller resolutions, you will need to configure
the output resolution to match.
This is performed using the hotkey combination: L Ctrl | L Ctrl | F11 | d | #
where # represents the desired resolution:
1 = 2048 x 2048
2 = 2560 x 1440
3 = 2560 x 1600
4 = 1920 x 1080
5 = 1920 x 1200
6 = 3840 x 1080
7 = 3440 x 1440
8 = 3840 x 2160
The above hotkey function is particularly useful if the output display is unable to display
the default resolution and you cannot view the OSD menu.
GENERAL CONFIGURATION
The configuration of your secure multi-viewer switch is achieved through the OSD:
• Video Settings , including output resolution, scaling, borders, preset selection, etc.
• Channel Settings , including front panel display channel names and security levels, front
panel button colors etc.
• USB Settings , including mouse configuration and hotkey choice.
• Advanced Operation , including factory reset.
To access the OSD menu, type: L Ctrl | R Ctrl | o
The menu will appear in the bottom left part of the primary screen and you use your
mouse to click the required options, with all changes being actioned upon exiting the
OSD. See page 12 .
Using with dual head computers
Dual head computers may be connected to channels 1+2 or 3+4. A video connection is
required to each input channel, together with a single USB and audio connection to the
primary channel (ie 1 or 3) for use with Windows or Linux.
Windows Operation
In addition, a Windows 10 driver is required, which may be downloaded from
www.adder.com.
On each multiple monitor computer, run the downloaded file. After accepting the licence
agreement you will be prompted to choose a destination folder. Either accept the
suggested location or change it, as necessary. No configuration is required.
Linux operation
Video, USB and audio connections are required to each channel: primary and secondary.
No drivers are required.
HT