manualshive.com logo in svg

ADDER AdderView CATx AVX4016, Руководство пользователя, Страница: 15 / 111

Поделиться
Скачать
ADDER AdderView CATx AVX4016 Скачать руководство пользователя страница 15



























14

Power in connection

The AdderView CATx unit is 
supplied with a single 30W power 
adapter which is sufficient to supply 
any configuration of the unit. The 
AdderView CATx IP unit has two 
power input sockets to allow an 
auxiliary (redundant) power adapter 
to be connected. There is no on/off 
switch on the unit, so operation 
begins as soon as a power adapter 
is connected.

Note: AdderView CATx units require a heavy duty power adapter at either or 
both power input connectors. Use only the adapter supplied with the unit or 
available under Adder part numbers: PSU-IEC-5V4A (for AdderView CATx) or 
PSU-IEC-5V6A (for AdderView CATx IP). Do not use the standard 10W adapters 
that are supplied with other Adder products, such as the X100. 

To connect the power supply

1  Attach the output lead from the power adapter to the 

MAIN PWR IN

 socket 

on the rear panel of the AdderView CATx.

2  Connect the IEC connector of the supplied country-specific power lead to 

the socket of the power adapter.

3  Connect the power lead to a nearby main supply socket.
4  Repeat steps 1 to 3 for the auxiliary power adapter (using the 

AUX PWR IN

 

socket), if a backup supply is required.

Note: Both the AdderView CATx and its power supply generate heat when in 
operation and will become warm to the touch. Do not enclose them or place 
them locations where air cannot circulate to cool the equipment. Do not operate 
the equipment in ambient temperatures exceeding 40 degrees Centigrade. Do 
not place the products in contact with equipment whose surface temperature 
exceeds 40 degrees Centigrade. Using two power supplies will ensure that each 
power supply takes less load and run at a correspondingly cooler temperature.

AdderView CATx 

rear panel

output lead from 

power adapter 

Содержание AdderView CATx AVX4016
















































































































Отзывы:

Нет отзывов