7
CONTENTS
INTR
ODUCTION
INST
ALLA
TION
OPERA
TION
FUR
THER
INFORMA
TION
X-DVIPRO: Use an optional
power adapter only if
powering from the host (via
USB) is not possible.
Note: After all connections are
made, power up the monitor and
the REMOTE module first (followed
by the LOCAL module, if using the
X-DVIPRO-MS2 variant with power
adapters) and then switch on the
computer.
Optional power connection
The X-DVIPRO local module is designed to derive its power from the host computer via
the USB connection (two USB connections in the case of the MS version). If this is not
possible, then you will need to use one or two optional Adder power adapter(s).
Optionally for X-DVIPRO and X-DVIPRO-MS2 units:
[MS2 variant only] Attach a second
category 6a or 7 link cable (up to 50
meters in length) to the upper socket
on the MS2 local module.
Secondary CATx link cable
Primary CATx link cable
2 Insert the IEC connector of the separate power lead(s) into the corresponding
socket(s) of the power adapter(s). Connect the other end of the power lead(s) to one/
two nearby mains socket(s).
X-DVIPRO-MS2: Use two
optional power adapters if
powering from the host (via
dual USB connections) is
not possible.
1 Connect the output lead of the optional
power adapter(s) to the socket(s) labeled
POWER
on the local module.
CATx link cable
Do not use squid cables or
power splitters. Two separate
power adapters must be used.
5 Connect the link cable (see page 2 for cable advice) to the local module socket labeled
TO REMOTE
.