11
INST
ALLA
TION
2
1
3
1
2
2
1
3
1
2
ALIF3000 RX
KVM & VM
NETWORK
2 Make your connection(s) between
the chosen SFP module(s) and
suitable network switch(es):
3 For fiber links, close the latch over the link connectors to lock them into place.
Fiber links
To create fiber links
1 Insert the appropriate optional SFP
module (SFP-MM-LC, SFP-SM-LC or
SFP-CATX-RJ45) into socket 1 and/
or 2 located on the rear panel of the
unit:
KVM & VM network links
Two
SFP ports are located on the rear panel to allow fiber or copper links to separate
networks, according to the type of modules that are inserted.
Fiber SFP
module
Note:
SFP-CATX-RJ45 for use with CAT5e (and above) cable.
SFP-SM-LC modules require OS1 or OS2 single mode fiber.
SFP-MM-LC modules require OM1, OM2, OM3 or OM4 multi-mode fiber.
See
for details.
Copper/CATx
SFP module
CATx link
Note: Units shipped before
July 1st 2020, will have
their network link ports
incorrectly labeled in the
order (L to R): 1,2, 3.
Note: Units shipped before
July 1st 2020, will have
their network link ports
incorrectly labeled in the
order (L to R): 1,2, 3.