ADDCOM ADD-665, Руководство пользователя

Страница: 12 / 18

7. pAiring HeADset
Ensure that headset is placed on the cradle before power is turned on. If the headset is not
placed on the cradle, pairing will be unsuccessful. The pairing process is automatic once
the power adapter is plugged into the base unit.
To pair more than one headset to a base station, follow the below steps for each headset.
Up to three headsets can be paired to a single base station.
7.1 Automatic pairing process
ADD-665 and ADD-685
1. Place the headset on the cradle
2. Plug the power adaptor into the base and wait for the LED indicators on the
base station and headset to start blinking
3. If the pairing is successful, the LED indicators will disappear
7.2 manual pairing process
1. Press the ‘PC/TEL’ button on the base station until the ‘in use’ LED indicator is
blinking on the headset
2. Press the ‘mute’ button on the headset
8. operAtion
Ensure the headset has been charged for a minimum of four hours before use.
8.1 making and receiving calls
8.1.1 making an outgoing call in telephone mode
• Lift the headset from the base to start the call. If you are already wearing the
headset press the call hook button (17) on the headset. The base in-use indicator (2)
will light.
• If a handset lifter or electronic hook switch device is connected to the headset
base, the line will be seized. Otherwise, you will also need to activate the headset
port via your telephone terminal.
• Dial the telephone number.
• After finishing the call, replace the headset on the base or press the call hook
button (17) to disconnect. The in-use indicator (2) will turn off.