Arnouse Digital Devices
User Guide
SR20-FDD
Version 1.0
© Arnouse Digital Devices 2022. All rights reserved.
Page 13 of 35
3.3.1
Removing the SR20-FDD Top Cover
To add or remove BioDigitalPC
®
s, the SR20-FDD chassis must be pulled out of the rack, and
the SR20-FDD's Top Cover needs to be removed temporarily.
Warning
:
The SR20-FDD can be running while installing new server cards. However,
caution must be taken to prevent damage to the equipment as exposed circuit
components may short if any metal objects are inadvertently dropped inside the chassis.
Future versions of all electronic components will be conformal coated to prevent this from
happening.
Figure 8- SR20-FDD Rear Panel
•
Step 1- Remove the center Phillips head screw.
•
Step 2- Slide the top cover to the rear and lift to release the cover from the 4 side locking
pins.
3.3.2
Installing a BioDigitalPC
®
Figure 9- PC Card Fully Inserted and locked
•
Step 1- Make the PC Card ejection lever is perpendicular to the system cover.
•
Step 2- Make sure locking tab is unlocked.
Figure 10- PC Card Track Setup
PC Card Ejection Lever
Small locking tab
