ADDAC System VINTAGE PRE ADDAC712, Инструкция по сборке

Страница: 3 / 10

ADDAC SYSTEM page 3
ADDAC712 Assembly Guide
STEP 1:
Grab the pcb, gently brake it apart and trim the excess with a cutting plier.
STEP 3:
Next place and solder all transistors, then trim the excess legs with a cutting pliers.
STEP 2:
Proceed by locating the six 22uf capacitors, notice the orientation printed on the pcb.
Tip: soldering these caps is easy, just place a dab of solder on the pad on your right (left pad if you’re
left handed) and then, with the help of a tweezer, put the capacitor in place and reflow the previously
tinned pad to melt the solder while pushing the capacitor down. Then solder the other pad.