ADDAC System ADDAC304, Инструкция по сборке

Страница: 8 / 12

ADDAC SYSTEM page 8
STEP 15:
Next place all the remaining push buttons, keep paying attention to the button’s orientation.
ADDAC304 Assembly Guide
STEP 13:
We’ll have to trim 2 legs of only one of the push buttons, cut 2mm of each of the legs further away
from the button’s flat face. Note that you only need to do this to 1 button.
STEP 14:
Place the button with the trimmed legs in the position shown below.
STEP 12:
Now let’s place the push buttons, note that there’s a specific orientation look for the button’s flat face
and match it with the pcb print.