14
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference that may cause undesired operation.
3.5. Demo Kit Utilization
3.5.1. Installation and Connection
A D900SS-20 Demo Kit includes a plate that holds the B900ss-20 radio module, the
antenna and the RS232 interface card.
In order to use it, connect the plate to a PC's COM Port through the supplied serial
cable and connect the power supply (see picture).
On the interface card, ALL the switches have to be set to 'Off' and, of course, the
On/Off switch has to be on the 'On' position.
A Windows Software, 'WinB900' parameterizes and tests the B900ss-20 radio module.
In order to install it on your PC, launch 'Setup.exe' located on the CD-ROM supplied in
the Demo Kit, in the WinB900ss directory.
Serial
Connection to
a PC COM Port
Power Connector
(Battery or Power
Supply)
