ADCMT 4601 I-V Meter, Руководство по эксплуатации

Страница: 26 / 236

4601 I-V Meter Operation Manual
1.2 Supplied Accessories
1-8
1.2 Supplied Accessories
The 4601 standard accessories are listed below. If any accessory is missing or damaged, contact an ADC
CORPORATION sales representative. Specify the part number when ordering.
1.3 Output Unit
As the voltage source/voltage measurement/current measurement terminal employs a unit system, it requires
the output unit that is sold separately.
The output unit contains the operate/standby relay. When the number of relay operations counted by the 4601
reaches the relay life cycle, the 4601 generates an alarm.
There are the following two types of output units with different terminal structures, either of which can be
mounted on the front or rear panel.
NOTE: When the output units are mounted on both the front and rear panels, operations will not be guaranteed.
Table 1-1 Standard Accessory List
Name Part number Quantity Remarks
Power cable
*1 A01402 1
Power fuse
*2
DFT-AA2R5A 1 100 V/120 V slow blow
DFT-AA1R6A 220 V/240 V slow blow
Thermocouple connector JCE-DA0002PX02 2 Plug
Pt, AD590 connector JCS-RB0005JX03 2 Plug
YEE-1000734 2 Cover
EMC-compliant clamp filter DEE-100115 4 Ferrite core with case
Cable tie ESM-000257 4 Clamp filter fixing tie
Operation Manual E4601 1 This manual
*1 : The power cable can be changed by specifying the option at the time of order.
For more information, refer to “Safety Summary.”
*2 : Either of fuses is included depending on the power supply option.
Table 1-2 Output Unit List
Output unit Description
CC046010 Safety socket terminal output unit
CC046011 Terminal block output unit