ADC ES35 Скачать руководство пользователя страница 2

2

American Dryer Corp.

450325 - 1

Retain This Manual in a Safe Place for Future Reference

This product embodies advanced concepts in engineering, design, and safety.  If this product is properly
maintained, it will provide many years of safe, efficient, and trouble free operation.

Only qualified technicians should service this equipment

.

OBSERVE ALL SAFETY PRECAUTIONS

 displayed on the equipment or specified in the installation

manual included with the dryer.

The following “

FOR YOUR SAFETY

” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline
or other flammable vapors
and liquids in the vicinity of
this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the
instructions  to  be  followed  if  the  user  smells  gas.    These
instructions must be posted in a prominent location near the dryer.

We have tried to make this manual as complete as possible and hope you will find it useful.  The manufacturer
reserves the right to make changes from time to time, without notice or obligation, in prices, specifications,
colors, and material, and to change or discontinue models.  The illustrations included in this manual may
not depict your particular dryer exactly.

IMPORTANT

For your convenience, log the following information:

  DATE OF PURCHASE ________________________________________________________ MODEL NO. ______________

  RESELLER’S NAME __________________________________________________________________________________

  SERIAL NUMBER(S) __________________________________________________________________________________

____________________________________________________________________________________________________

____________________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory.  When ordering replacement parts
from the factory, you can FAX your order to ADC at +1 (508) 678-9447 or telephone your order directly to the
ADC Parts Department at +1 (508) 678-9000 or contact [email protected].  Please specify the dryer model
number and serial number in addition to the description and part number, so that your order is processed
accurately and promptly.

ES35

Содержание ES35



































Отзывы: