manualshive.com logo in svg

ADC ES35/35, Инструкция по установке и эксплуатации

Поделиться
Скачать
ADC ES35/35 Скачать руководство пользователя страница 5

WFR 112807 - 15

www.adclaundry.com

5

  NOTES _____________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

IMPORTANT: 

The dryer must be installed in a location/

environment, which the ambient temperature remains
between 40° F (4.44° C) and 130° F (54.44° C).

The operation of this appliance may affect the operation of
other types of gas appliances, which take their air for safe
combustion from the same room.  If in doubt, consult the
appliance manufacturer(s).

Use this dryer only for its intended purpose, drying fabrics.

The “cool down” cycle of tumble dryers should be used to
reduce the temperature of the items. They should not be
removed from the tumble dryer or piled or stacked while
hot.

Fabric softeners or similar products should not be used in
a tumbler dryer to eliminate the effects of static electricity
unless this practice is specifically recommended by the
manufacturer of the fabric softener or product.

!

 WARNING

To reduce the risk of personal injury, install lockable
doors to prevent public access to the rear of the
dryers.

Exhaust duct outlet should be checked periodically for
blockages, and if any found, removed.

IMPORTANT: 

A means of restraint must be used to

prevent straining of the gas supply when the appliance is
moved.

An external means of power removal (disconnect device)
must be provided by the installer.

CE ONLY

IMPORTANT: 

This appliance must only be installed and

operated in the country of destination indicated on the
dryer’s data plate.  If the appliance is to be installed and
operated in a country other than the one indicated on the
data plate, a data plate amendment must be obtained
from American Dryer Corporation.

IEC335 applies.

!

 WARNING

This appliance must only operate with the gas type
indicated on the dryer’s data plate.  If the appliance is
converted (gas type is changed), a data plate
amendment must be obtained from American Dryer
Corporation.

This appliance may cause spillage of products of
combustion from an open-flue appliance fitted in the
same room, and that such an appliance shall be tested
for clearance of products with the appliance in
operation and all windows and doors closed.

Содержание ES35/35

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды