Schematic Parts List
Assembly Instructions for the
Diagnostix
TM
752M
1. With base on its side
connect upright outer pole
to base using the long hex
bolt. Tighten with the large
hex key provided. Tighten
hardware as securely as
possible. (Note: To prevent
loosening, hardware must
be tightened securely and
periodically checked).
(Figure 1).
2. Slide stainless steel inner
pole inside outer pole with
open end up.
(Figure 2).
3. Loosen the hex bolt on col-
lar of cuff storage basket
with small hex key provid-
ed. Place cuff storage bas-
ket on top of stainless
steel inner pole making
sure the pole goes com-
pletely inside collar and
tighten hex bolt with key.
(Figure 3).
4. Attach manometer
bracket to cuff storage
basket using the short
hex bolt and washers
as shown. Tighten
securely with large
hex key. (Figure 4).
Included Tools
Large Hex
Key
Small Hex
Key
5. Adjust height of manometer by loosening knob and rais-
ing or lowering inner pole until gauge is at desired
height. Tighten knob by hand.
6. Connect coiled tubing to gauge inlet. (Note: The coiled
tubing may be difficult to connect, moisten with soapy
water if necessary). Refer to booklet entitled DIAGNOS-
TIX
™
Aneroids Pocket, Palm, Clock Type booklet
(9350N-00) for instructions on operating the unit.
Connect outer pole to base
assembly. Note: Tighten large
hex bolt securely by applying
as much force to hex key as
possible.
Large Hex Bolt
2
Slide inner pole inside
outer pole.
3
Insert pole into bottom of cuff
storage basket and tighten hex
bolt on side of the basket with
small hex key.
4
Attach manometer bracket to
cuff storage basket.
Cuff storage
basket
Short Hex
Bolt
1
9B
4
5
6
7
8
9
9A
9C
9C
6A
1
2
3
3A
Ref # Item # Description
1 972-101 Long Hex Bolt and Washer (1)
2 972-080 Base
3 972-106 Casters (5)
3A 972-106-1 Single Caster
4 972-107 Outer Pole
5 972-108 Knob
6 972-109 Spring
6A 972-107A Gasket
7 972-110 Inner Pole
8 972-111 Tightening Device
9 972-112 Cuff Storage Basket
9A 752-113 Manometer Bracket
9B 752-114 Short Hex Bolt & Washer
9C 752-115 Manometer Bracket Hardware
Mobile Stand Assembly for the 752M
