Reading Your Results
After measurement begins, you will see three pieces
of information displayed on your pulse oximeter:
A pulse bar graph display corresponding with
•
your pulse beat will be shown. The height of
the bar graph shows your pulse strength.
Your pulse rate will be displayed as BPM or
•
beats per minute.
The amount of oxygen in your blood will be
•
displayed as SpO2%.
Changing Directions of the Display
When you first power on the unit, the display will orient it with the numbers facing the person wear-
ing the device. The display can be re-orientated to face the other direction, if desired.
To change the direction of the display, press the power button while the unit is displaying a reading.
Note:
By default, the unit will always display the readout facing the wearer.
Maintenance and Storage
When the low power indicator comes on, you must replace the batteries.
•
The surface of the pulse oximeter that comes into contact with your finger should be kept clean.
•
When storing the pulse oximeter for more than 30 days, remove the batteries.
•
When storing the pulse oximeter, ensure that the temperature is between -4°F to 131°F (-
•
20°C to 55°C) with a relative humidity greater than or equal to 93%.
Store the pulse oximeter in a dry environment. Exposure to moisture may decrease the lifes-
•
pan of your device.
Batteries should be disposed of in accordance with local and state laws.
•
Cleaning the Pulse Oximeter
Clean the rubber touching the finger inside of the device with a soft dampened cloth with 70% iso-
propyl alcohol, and clean the test finger using alcohol before and after each test. Do not pour or
spray any liquids onto the Oximeter, and do not allow any liquids to enter any openings in the de-
vice. Allow the device to dry thoroughly before reusing.
Detailed Description of Product Functions
1. Display Type: LED
2. SpO2:
Measurement range: 70-99%
Accuracy: 80%-99%, ±2%;
70%-80%,±3%;
≤
69% no definition.
3. Pulse Rate:
Measure range: 30-235 BPM
Accuracy: 30~99BPM, ±2BPM;
100~235BPM, ±2%
Pulse Intensity: Bar Graph Indicator
4.Power Requirements: Two (2) AAA alkaline Batteries
Power consumption: Less than 40mA
Low power indication:
Power But-
ton
Low Power
Indicator
Pulse Bar
Graph
Pulse
Rate
Oxygen
Saturation
Finger Enters Here
Press Here
to Open
Battery Life: Two AAA 1.5V, 600mAh alkaline
Could continuously operate for 30 hrs.
5. Dimensions:
Length: 2.19” (5.5cm)
Width: 1.13” (2.9cm)
Height: 1” (2.5cm)
Weight: 1.76oz. (50g)
(including two AAA batteries)
6. Environment Requirements:
Operation Temperature: 41°F-104°F (5°C - 40°C)
Storage Temperature: -4°F to 131°F (-20°C - 55°C)
Ambient Humidity:
Operation: ±80%, non-condensing
Storage: ±93%, non-condensing
