Copyright© All rights reserved by ADC Technology Inc.
COMMAND
ZEAL will operate in the original BT COMMAND. Command begins with BT, and followed
by a command character, and termination input the CR. (CR=0x0D)
List of commands
Command
Description
A
Scan start
C
Connect
D
Disconnect
I
Inquiry start
LT
Address setting of the link partner
LO
Automatic mode setting
LB
Baud rate setting
M
Show BD address
Y
Initialization
Z
Show firmware version
Escape command
This is a special command to be ready for input command temporarily.
Escape command is a continuous input three times ‘@’.
Result Code
This is the string to notify the results of executing the command. Termination is
CR + LF is output. (LF=0x0A)
List of result codes
Result Code
Description
ACKN
Receipt of the command
CONN
Connected
DISC
Disconnected
TERM
Terminate of the command
E000
Unknown Error
E100
Undefined command Error
E101
Parameter Error
E200
State cannot execute this command
E300
Pair could not be found
E301
Failed to authenticate
E400
Incorrect setting value
