manualshive.com logo in svg

ADC Kentrox 78210, Руководство оператора

Поделиться
Скачать
ADC Kentrox 78210 Скачать руководство пользователя страница 8

FCC PART 68 REQUIREMENTS

This equipment complies with Part 68 of the FCC rules. On the bottom of this
equipment is a label that contains, among other information, the FCC
registration number and ringer equivalence number (REN) for this equipment.
Upon request of the telephone company, you should provide the FCC
registration number and the ringer equivalence number (REN) of the equipment
which is connected to your line. The D-SERV DSU/CSUs registration number is
F8IUSA-74432-DE-N and the REN is 0.0B.
The D-SERV DSU/CSU operates with a 1.544 Mbit/s/s digital channel using an
RJ48C USOC 8-pin modular connector on the back of the D-SERV unit.
The REN is used to determine the quantity of devices which may be connected
to the telephone line. Excessive REN’s on the telephone line may result in the
devices not ringing in response to an incoming call. In most, but not all areas,
the sum of the REN’s should not exceed five (5.0). To be certain of the number
of devices that may be connected to the line, as determined by the total REN’s
contact the telephone company to determine the maximum REN for the calling
area.
The service code is 6.0N. The Facility Interface Code is 04DU9-C for lines using
the Extended Super Frame format, 04DU9-B for lines using the Super Frame
format, and 04DU9-S for lines using the B8ZS format. All D-SERV models
connect to the network using an RJ48C connector.
The telephone company must be notified before removal of a D-SERV DSU/CSU
connected 1.544 Mbit/s/s digital service. If the telephone company notes a
problem they may temporarily discontinue service, and will notify you of this
disconnection. (If advance notice is not feasible, you will be notified as soon as
possible.) When you are notified you will be given the opportunity to correct the
problem and informed of your right to file a complaint with the FCC.
The telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the operation of the equipment. If this
happens, the telephone company will provide advance notice in order for you to
make the necessary modifications in order to maintain uninterrupted service.
Normally, the D-SERV DSU/CSU will be used in conjunction with FCC registered
equipment that limits the Encoded Analog Content and provides the required
Billing Protection. If the connected equipment is not of this type, an affidavit
must be supplied to the telephone company where the network connection is to
be made. The affidavit is to be notarized, and is to be filed at least ten days
before the initial connection.
If trouble is experienced with this equipment (the D-SERV DSU/CSU), please
contact the Customer Service Department, Kentrox Industries for repair and
warranty information.

Contiguous 48 states including Oregon:1-800-733-5511
Elsewhere: 1-503-643-1681

If the trouble is causing harm to the telephone network, the telephone company
may request you remove the equipment from the network until the problem is
resolved.

All repairs should be handled by authorized Kentrox Service Personnel.

Operator's Manual

vi

Содержание 78210
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды