Page 15
R e v. : 0 0 2
Micro-Scope II
Lighting Technologies
Auto-Backup if DMX Fals
The AUTO-BACKUP menu allows Micro-Scope to be connected inline between a
lighting desk and dimmers. Micro-Scope monitors the received DMX512 and should the
signal fail, switches one of the fifteen Presets to the output. This mode provides a useful
backup which forces a known look on stage should the console fail. When the backup
mode is triggered, the user can snap between the presets.
AUTO-BACKUP IF
DMX FAILS
When the menu is entered, the following display is shown and received DMX512 is
looped to the output. The UP and DOWN keys are used to select the Preset that will be
output should the received DMX512 fail.
AUTO-BACKUP: 15
WAIT-DMX 15 GOOD
If the DMX fails, the following display is shown and the selected Preset is output to the
dimmers. When the problem with the received DMX512 has been corrected, simply
press MENU twice to reset AUTO-BACKUP mode. When AUTO-BACKUP is active, the
UP and DOWN keys are used to snap between consecutive Presets.
AUTO-BACKUP: 15
ACTIVE-DMX FAIL
Loop Through
The BUFFER DMX/MIDI option is used to selected between Micro-Scope's Generator
output and a buffered copy of the incoming DMX512 signal. The loop through mode is
selected by pressing the TOGGLE key when the menu is displayed. The BUFFER mode
of operation allows Micro-Scope to be used as a signal booster for long DMX512 or MIDI
cables.
BUFFER mode is switched off when the Generator Menu is next selected. When
BUFFER mode is active, "L" is shown in the receive window to denote "Loop Through"
BUFFER DMX MIDI
DISABLED
Select DMX Start Code
The START CODE menu is used to select non-zero DMX512 start codes. The START
code is defined in the protocol but has not been implemented by many manufacturers.
The UP and DOWN keys are used to select any one of the 256 possible values. The same
value is used for both receive and transmit DMX512.
If a non-zero value is selected, a warning is displayed when the Micro-Scope is next
switched on.
SELECT DMX START
CODE: 000
Содержание Micro-Scope II
