ADB i-Can 1110SV, Руководство пользователя

Страница: 28 / 34

Modem Diagnostics
The Modem Diagnostics screen allows you to check the modem
connection. If any problem is detected, an appropriate message
is displayed. When no problems are detected, you can check if
the modem is properly connected by following the instructions
displayed on the screen.
Signal Meter
This screen displays the signal strength and quality. The displayed
data concerns the currently tuned channel.
Antenna Configuration
In the Antenna Configuration screen you can adjust the settings
of your antenna. If you have a single LNB installation choose Off in
the Antenna Control option. However, if you have more advanced
installation than depending on its type and LNB type you can
choose between DiSEqC and Unicable control.
Unicable
For Unicable control you have to set the following options:
Unicable Channels - select the number of channels of your
Unicable LNB. You can choose between 4 and 8.
Channel Number - select the appropriate output number of the
LNB your receiver is connected to.
Unicable Channel Frequency - once you select the Channel
Number the receiver assumes standard frequency for this number.
However, you can change it by editing this option.
USING YOUR RECEIVER
28
When changing the settings, please remember that at
least one LNB must be assigned to Hotbird Satellite.