ADB Safegate ACE2, Руководство пользователя

Страница: 29 / 46

5.3 Internal-Mount Installation
The Internal-mount ACE2 is installed into the door of the L-829 CCR, see Figure 15 . The CVM and IRMS board (if present) are
already wired inside the CCR. Only running and connecting external ACE2 communications wiring among other ACE, ACE2,
and the Vault computer is required. The ACE2 is located on the interior, attached to the hinged door. To gain access to the
ACE2, open the CCR door, unlatch and open the ACE2 enclosure door. See Figure 14 .
Figure 14: Internal-Mount, External View
Figure 15: Internal-Mount, Interior View
5.4 Combo Box-Mount Installation
Locate each ACE2 Combo Box unit as close as possible to each of the controllable elements like the Regulator, the Generator,
etc.
96A0357, Rev. G, 2019/11/08 23
Copyright
©
ADB Safegate, All Rights Reserved