GB
23
1) Installation:
•
ON/ OFF switch (7) in OFF position.
•
Loosen the screw on the SIM cover (8)
•
Push the SIM-card holder (10) to the open position. Then place the
SIM-card with the bevelled corner corresponding to the slot and
the gold coloured chip downwards.
•
Slide the holder back into the closed position.
•
Screw the SIM cover back into place (8).
•
Plug the temperature sensor (9) into its port (2). This must be con
-
nected for temperature controlled commands to function.
•
Set the ON/OFF switch (7) to the ON position.
•
Plug ADAX SET into a power outlet.
Description of ADAX SET:
1. Data port (for service personnel only)
2. Temperature sensor port
3. Power output button (see point 2,
page 24)
4. Power output (max 16A)
5. Signal lamps (see point 4, page 24)
6. Power in
7. System ON/OFF
switch
8. SIM cover
9. Temperature sensor
10. SIM-card holder