1
2
8
NEO2
USER GUIDE
HOME MODE (HO):
Start
nighttime
temperature cutback
At the time of evening you wish temperature cutback to
start, press the button for more than five seconds.
h (hours) will flash three times in the display and then 7
will flash continuously. With the or key select the
number of hours you want the temperature cutback period
to last. When your selection is displayed, confirm it by
pressing the button briefly.
°C will flash three times and then 17 (°C) will flash con-
tinuously. Using the or key, select the temperature
you wish for the cutback period. When your selection is
displayed, confirm it by pressing the button briefly.
The lamp will now flash slowly to indicate that tem-
perature cutback is active. The temperature is reduced
for the number of hours you have chosen, and this will be
repeated for the same period every night.
Start
daytime
temperature cutback
At the time you wish temperature cutback to start, press
for more than five seconds.
h (hours) will flash three times and then 5 will flash
continuously. Using the or key, select the number
of hours you want the temperature cutback period to last.
When your selection is displayed, confirm it by pressing
the button briefly.
d will flash three times and then a random number. Us-
ing the or key, enter the correct day of the week
(Monday = 1, etc.). Confirm by pressing the button
briefly.
°C will flash three times and then 17 (°C) will flash contin-
uously. With the or key select your preferred cut-
back temperature. Confirm by pressing button briefly.
The lamp will now flash slowly to indicate that daytime
temperature cutback is active. The temperature is reduced
to your selected setting for the number of hours you have
chosen. This will be repeated for the same period every
weekday, leaving Saturday and Sunday unaffected.
OFFICE MODE (OF):
To enter office mode hold down and press for more
than five seconds until OF flashes and 20 (°C) is displayed.
Starting the temperature cutback function
Three hours before you usually leave the office press and
hold down the button for five seconds (e.g. at 14:00 – 2
PM).
h (hours) will flash three times in the display, then 12 will
flash. Select the number of hours you want temperature
cutback to last by pressing the or key. Confirm
by pressing briefly. (NB! Cutback will start after three
hours.)
d (day) will flash three times, then a random number will
be displayed. Enter the correct day using the or
key (Monday = 1, etc.). Confirm by pressing briefly.
cL (time of day) will flash three times, and 16 is displayed.
Use the or key to enter the closest whole hour of
the day. Confirm by pressing briefly.
°C will flash three times and then 16 is displayed. With the
or key, select your preferred cutback temperature.
Confirm by pressing the button briefly.
Comfort temperature will continue for three hours before
the cutback period starts automatically.
(E.g. Pressing at 14:00 – 2 PM – will make temperature
cutback start at 17:00 – 5 PM and the lamp will flash slowly.
During the three hours before cutback start the lamp is lit
steadily.)
Working overtime
When working overtime the cutback function may be
overridden. Press for more than five seconds. The set
comfort temperature will be displayed. The lamp will
light steadily while the lamp continues to flash. This
temporary period of comfort temperature will last for five
hours.
1
Heat on/off
2
Desired (set) temperature
Up and Down keys
Function button
Night temperature cutback (7 days)
Day temperature cutback (5 days)
GB/AU/NZ
NB! The main power switch i located on the heater’s
underside to the right. The display lamp indicates that
power is connected and the heater is switched on.
Basic functions
When the heater is switched on for
the first time, the display will show
20 degrees and the heater will im-
mediately start working.
Automatic saving of the comfort
temperature setting
NB! Each time a new comfort
temperature is selected using the
and keys, this latest choice
will be automatically saved. After
lengthy power cuts the last selected
setting is resumed.
