Set up times and temperature
The process must be carried out at the time you require the temperature to increase or decrease during the day
.
1.
Select the desired time (e.g. 10.30 PM)
2.
Turn the control dial to the desired temperature (e.g. 18°C –night-time reduction)
3.
Quickly press the control dial in 2 times during the course of 1 second – The green light will blink to confirm it is
set
The time and temperature are now set and will change to the set temperature at the same time every day.
1.
Specify a new, adjusted temperature at the time you require (e.g. 6.30 AM)
2.
Turn the control dial to the desired temperature (e.g. 22°C –comfort temperature)
3.
Press the control dial in quickly 2 times during the course of 1 –The green light will blink to confirm it is set
Repeat the above process until you have set all the times and temperatures required during your Day or Week
schedule.
When the programme is active, the temperature will be adjusted at the times specified, irrespective
of the temperature showing on the control dial until you choose another programme or stop the programme.
Erase saved programme settings
1.
Turn the control dial to P2 (P2 so it is aligned with the LED light)
2.
Press the control dial in for 3 seconds – The green light will blink to confirm it is set
3.
If no settings have been saved, the green and red light will blink
Your P2-settings are now erased.
Adax AS, Myresgt. 1 3060 Svelvik, Norway. www.adax.no
Art.no: 62263 Dato: 01.04.2020
12
LED indications
- Idle (until ambient temperature drops).
- Heating (until ambient temperature increases).
- Knob input accepted.
- Child lock is active.
- Heater is inactive. Selected mode is not con
fi
gured.
- Heater is inactive. Open window detected.
