08
07
Use the provided Fan Screws to install the Fans on the Radiator.
Connect each 3-Pin LED Cable in series as diagram below.
Then connect the provided
ARGB LED CABLE
to motherboard or I/O Ports.
ARGB LED CABLE
Connect this
ARGB LED CABLE
to
Pump’s ARGB 3-Pin connector for
Daisy Chain Lighting Effect.
Connect this
Fan Power Cable
to motherboard
Fan Power Cable
1.
Connect each 4-Pin Fan Power Connector in series as diagram below.
Finally connect the provided
Fan Power Cable
to motherboard.
2.
3.
FAN INSTALLATION on the RADIATOR
FAN INSTALLATION on the RADIATOR
