953.019UK User Manual
Front Panel
Rear Panel
Applications
The Z5M can be used for any multi-output setup and is ideally suited to controlling a multi-room zoning sound
system with up to 5 stereo or mono zones. Individual zones can be selected as mono if speaker placement is
not conducive to stereo imaging. 2 separate stereo inputs can be selected or blended at will for each zone,
opening up the possibility of separate program material for specific zones.
Connection
All connections are via balanced XLR and operate at line level. Use good quality XLR signal leads to connect
the source signals to LINE 1 and LINE 2 inputs. Each output should be connected to the respective amplifier
or active speakers for the particular zone, again using good quality XLR signal leads. Connect mains using the
supplied IEC lead.
6.
LINE 2 left & right inputs (balanced XLRF)
7.
LINE 1 left & right inputs (balanced XLRF)
8.
ZONES 1 to 5 left & right outputs (balanced XLRM)
9.
IEC mains inlet and fuse
1.
POWER switch and indicator
2.
LINE 1 source volume controls for each zone
3.
MONO mode switch and indicator for each zone
4.
LINE 2 source volume controls for each zone
5.
LINE 1 and 2 signal indicators
