953.030UK User Manual
USB player
When a USB memory stick is inserted into the USB port, the track number and time will show in the display
and audio files will start to play automatically.
If playback does not start automatically, press the SOURCE select button and Play/Pause
button to check
if the player is set to the correct mode. Try Previous
and Next
buttons if the selected track is unable to
play. Also, check that the audio files are mp3 type.
Turn up the MEDIA volume control to hear the output from the speakers and increase to the required level.
There are 3 repeat modes: Repeat All tracks, Repeat Current track and Random.
Pressing the REPEAT button will cycle through these modes as shown in the top right of the display.
Pressing the Previous
button briefly steps backwards through tracks on the memory device. Press and hold
this button to decrease the playback volume.
Pressing the Next
track button briefly steps forwards through tracks on the memory device.
Press and hold this button to increase the playback volume.
To pause the current track, press the Play/Pause
button and press it again to resume playback.
AUX input
When a playback device is connected to the 3.5mm AUX input, the display will show “AUX”.
Alternatively, this source can be selected by the SOURCE button.
The output level of this AUX input is controlled by the MEDIA volume control and is independent of the rear
RCA line inputs. When other media player sources are selected, this AUX input is muted.
Specifications
Power supply
100-240Vac, 50/60Hz
Fuse
T2AL
Inputs
3 x XLR/jack (bal/unbal) mic/line, 2 x Aux L+R RCA, 3.5mm jack to media player
Audio source
Internal Bluetooth, USB, FM & Aux player
Output power: RMS
2 x 120W @ 4
Ω
Speaker outputs
L+/L-/R+/R- screw terminals (Euroblock)
Line outputs
L+R XLR, Record out (RCA)
Emergency control
24V contacts mute all except channel 1
Phantom power
+20V (switchable channels 1-3)
Input impedance
2.2k Ohms (mic/line), 10k Ohms (aux)
Controls
Media, 3 x Mic/Line, 2 x Aux, Treble, Bass, Master level
Rear panel controls
CH.1 override level, mic/line and phantom DIP switches
Frequency response
Mic: 20Hz - 18kHz, Line: 14Hz - 20kHz, Aux: 10Hz
–
23kHz
Input sensitivity
-45dBV
Input sensitivity: aux/line
-10dBV
Signal to noise ratio
Mic: 55dB, Aux/Line: 60dB
Dimensions
482 x 130 x 44mm
Weight
1.96kg
Disposal:
The “Crossed Wheelie Bin”
symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Hereby, AVSL Group Ltd. declares that the radio equipment type 953.030UK is in compliance with
The full text of the EU declaration of conformity is available at the following internet address:
http://www.avsl.com/assets/exportdoc/9/5/953030UK%20CE.pdf
Errors and omissions excepted. Copyright© 2023.
AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland
