General Functions and Controls
1.
POWER SWITCH -
This switch is used to control the unit's main power.
2.
PRESET MEMORY 1-10 –
Press to select the pre set radio stations 1-5 or to access the
secondary memory 6-10 press shift followed by the marked number. To save a preset
station to a memory button press and hold the number you want to save to for 5
seconds and the unit will auto store.
3.
SHIFT
– Used to access secondary functions on the control panel.
4.
MODE -
The receiving band is changed between DAB and FM frequencies.
5.
DOWN
– Press to decrease the receiving frequency by 50kHz.
6.
UP
– Press to increase the receiving frequency by 50kHz.
7.
AUTO SCAN
– Press to start auto scanning feature. Once finished use the control wheel
to select the station.
8.
SELECT
– Press to confirm a selection.
9.
MENU/INFO
– Press to see the details of the radio station (DAB only)
10.
DISPLAY
– Alpha numeric display.
11.
REMOTE SENSOR
– Infrared sensor for remote control.
12.
CONTROL WHEEL –
Move left and right to toggle through the radio stations and press
to confirm.
13.
ANTENNA –
Screw slot for the supplied antenna. This is needed especially for DAB
signal
14.
RCA OUTPUT
– Unbalanced audio left and right.
15.
IEC POWER INPUT
– IEC socket for the supplied power lead.
