February 11, 2004
AlphaVision PC Type B Single-Sided Signs Mechanical Installation Guide (9712-7014A)
2
3
Hang the sign from chains using all the lifting hooks.
•
Hang the sign from four separate mounting points. Do not hang
two chains from the same point.
•
Allow minimum clearances as shown below.
Possible crush hazard.
Always use eyebolts to lift
sign. Otherwise the sign
may fall, causing serious
injury or death.
WARNING
SM1017
12” between fans or vents and any surface nearby. Vents are
located at the bottom of the sign. To avoid damage to the sign, do
not place the sign on a flat surface.
6” between the top of the sign
and any surface nearby.
48” between
face
of the sign
and any surface nearby.
36” between the
sides
of
the sign and any surface
nearby.
Attach each chain to a
separate mounting point.
2
Lift the sign using the lifting hooks.
Lifting bar
Lifting hooks
40°
maximum
angle
Possible crush hazard.
Always use eyebolts to lift
sign. Otherwise the sign
may fall, causing serious
injury or death.
WARNING
SM1017
Recommended way to lift sign (using a lifting bar)
Lifting hooks
Lifting bar
Alternate way to lift sign (without a lifting bar)
Chains
Lifting hooks
