Replacing the WiFi Access Point or Bridge
4
Part Number 1288610102 rev. C
Step 3: Send a test message
1.
Start Ooh!Media.
Click
Start > All Programs > Ooh!Media > Ooh!Media
.
2.
In the lower portion of the Ooh!Media window under Run-time Objects, click the insert new text button.
A new text message box appears in Ooh!Media.
3.
Highlight the text inside the message and type an appropriate test message.
4.
Extend the length of the message by stretching it in the Timeline.
Extend the message long enough for you to go to the sign and look at it.
5.
Click the disk icon to save the message.
6.
Name the message and click
Save
.
7.
Click the send message icon to send the message to the sign.
8.
Verify the message appears on the sign.
Insert new text button
Time in seconds