FP-MK2-2X1
ALWAYS INSTALL SAFETY CABLES
WARNING:
Mounting and/or suspension loudspeakers requires experienced
professionals. Improperly installed loudspeakers can result in property
damage, personal injury and/or liability to the installing contractor.
Adaptive Technologies Group
1635 E. Burnett Street | Signal Hill, CA 90755 USA
Ph: 562.424.1100 | Fax: 562.424.3520
www.adapttechgroup.com
REV00-08302015
2 of 2
Installation Guide
2X1 Planar Array Kit
Step 4:
Install two 3/8x1.25” long eyebolts with flat washers to
the lower back rigging points of speakers for pull back attachment
(Figure 2)
.
Step 5:
Use the eyebolts on top of the speakers for primary
suspension points. Use the rear eyebolts for pull back points to
adjust the tilt angle of the cluster. Bridle the two pull back points if
necessary to create a single pull back cable
(Figure 3, Figure 4)
.
Step 6:
Tighten all bolts permanently.
Step 7:
Check all hardware connections before hoisting cluster.
Figure 3
Figure 4
