Adaptive Micro Systems Alpha, Инструкция по установке и эксплуатации

Страница: 16 / 34

ALPHA
®
Solar
™
Sign
10 Basic sign operation: Setting a sign’s serial address
Setting a sign’s serial address
The serial address is a number you can assign to a sign. Typically,
this feature is used for a sign that is connected to other signs on a
network. Assigning a unique serial address allows you to send messages
to that
particular sign.
See the document Network Configurations (part number 9708-8046)
for more detailed information on networking signs.
NOTE: The serial address can also be set by using DIP switches
inside the sign. See “Appendix B: Using DIP switches to set
the serial address” on page 25.
Step When you do this... You see this...
1 Press PROGRAM .
2 Press BACK until SET SERIAL ADDRESS appears.
3 Press ADV .
4
Type a number, like 10 .
NOTE: A serial address is actually a number from
0 to 255 in
hexadecimal (00 to FF).
Typically, however, entering a number
from 00 to 99 is fine.
NOTE: When a sign leaves the factory, its serial
address is set to 00.
5 Press RUN twice to set the new serial address and return the sign to normal operation.
PROGRAM
TEXT FILE A
SET SERIAL
ADDRESS
SERIAL ADDRESS = 00
SERIAL ADDRESS = 10