Adaptec Snap Server 700i Series, Руководство пользователя

Страница: 41 / 236

Step 1: Starting Adaptec Storage Manager
Chapter 4 Setting Up Your iSCSI Storage Appliance and IP SAN 35
Step 1: Starting Adaptec Storage Manager
Note
You need root or administrative privileges to run Adaptec Storage Manager.
You can’t run multiple instances of Adaptec Storage Manager on the same system.
1
Start Adaptec Storage Manager.
• On a system running Windows, click
Start > Programs > Adaptec Storage
Manager
.
• On a system running Linux:
a
Type
cd /usr/StorMan
, then press
Enter
to change to the Adaptec Storage
Manager installation directory.
b
Type
sh StorMan.sh
, then press
Enter
:
Adaptec Storage Manager opens
and the Login to Management
Service window pops up. If the
Management Service is installed
on the same system as the GUI,
the host name and user name
fields will be automatically filled
in.
2
Enter the Administrator
password you set when you
installed Adaptec Storage
Manager.
If the Management Service is not installed on the local system, enter the name or
TCP/IP address of the system on which the Management Service is installed,
then enter the Administrator user name and password you set when you
installed Adaptec Storage Manager.
Note
If you want to be prompted to log in to the Management Service each time
Adaptec Storage Manager is opened, uncheck the
Save user name/password
check box. You might want to do this if some users have user-level access only to
Adaptec Storage Manager. See page 48 for more information.
The wizard opens and the Add iSCSI
Storage Appliance window pops up.
Note
If your iSCSI Storage Appliance
is on a network without a DHCP
server, complete the steps in
“Building an IP SAN Without a DHCP Server” on page 24 before you continue
with this section.