Adaptec Snap Server 700i Series, Руководство пользователя

Страница: 173 / 236

iSCSI Configuration for Microsoft Windows
Appendix A Configuring iSCSI Initiators 167
8
Click the plus sign, then
type in the IP address of
the target portal.
9
Leaving the iSCSI Name
field blank will force
discovery of all available
targets. Or you can
double-click the iSCSI
Name field and type in
an iSCSI name of a
target. Then click
Save
Target Settings
and
provide the password
when asked to connect
to the target(s).
Notes
The Target Settings tab shown above offers several options:
• Click the
Auto-bind discovered Targets
button. All discovered targets will be
bound to the Initiator port
• Click to put a check in the
Bind
box. The Initiator will access the bound targets
even after the adapter is reset or the server is rebooted.
• Click to put a check in the
Enable Target
box. The Initiator will log on to
enabled targets when
Refresh
or
Save Settings
is clicked.
• A check will automatically appear in the
Dynamic
box once Discovery is run
and the target will be saved into the flash memory.
For example, to log off some targets but retain their information, uncheck the
Enable Target
box next to these targets, and then click
Save Settings
. Or, if you
want to remove a target, uncheck the
Bind
box next to it, and then click
Save
Settings
.
10
When a dialog to refresh target status displays, click
Yes
to see the updated
target status. The QLogic Initiator, by default, will try to log onto all targets
simultaneously.
Click