Adaptec LSM-FC2002 - Loop Resiliency And SES Module Expansion, Руководство по установке

Страница: 62 / 110

Connecting a Power Source
62
Connecting a Power Source
The 2Gb SANbloc enclosure supports dual AC power
supplies. Only one power supply is required for normal
operation. However, a second, optional, power supply may
be added to provide a redundant power system. Each power
supply has its own AC power inlet.
CAUTION: Power supply cords shall have conductors with a
cross-sectional area not less than 4mm
2
. This cross-sectional area
corresponds to a minimum 10AWG wire.
Connecting an AC
Power Source
1
Ensure all cables have been attached as described in the
preceding sections.
2 Attach the AC power cords to the power supplies and turn the
power supply switches to the On (-) position (see Figure 4-9).
Figure 4-9 Attaching the AC power cords
WARNING: This equipment must be connected to an earthed
mains socket outlet. Ensure the power cabling provides earthing
continuity to the equipment.
1
2
1
2
0
I
0
I
Insert Power cords into
power connectors
1
2
3
4
5
6
7
1
2
3
4
5
6
7