Adaptec AVC-3610, Начало работы

Страница: 21 / 38

20
3 Connect an RF coaxial cable from
the TV In port on the
set-top box to
your
TV wall jack.
4 Connect the IR blaster cable from the Adaptec AVC-3610 to
your
set-top box. You must connect the IR blaster cable to
be able to change channels.
Note: For dual-tuner connections, follow the instructions in
Step 5 on page 17 .
a Plug the IR blaster cable into the IR 1 port on the Adaptec
AVC-3610.
b Peel the protective paper off the emitter end of the cable,
then adhere it over, or as close as possible to, the infrared
lens of your set-top box.
5 Continue with Completing the Setup on page 25 .