Adaptec AVA-2906, Руководство пользователя

Страница: 25 / 38

19
SCSI Card 2906 User’s Reference
Using SCSI Disk Utilities
To access the SCSI disk utilities, follow these steps:
1
Select the SCSI Disk Utilities option from the menu that
appears after starting SCSISelect. SCSISelect scans the SCSI bus
to determine the devices installed and displays a list of all SCSI
IDs and the devices assigned to each ID.
2
Use the
↑
and
↓
keys to move the cursor to a specific ID and
device, then press Enter.
3
A small menu appears, displaying the options Format Disk
and Verify Disk Media.
■
Format Disk
—Allows you to perform a low-level format
on a hard disk drive. Most SCSI disk drives are preformatted at
the factory and do not need to be formatted again
. Each hard
disk drive must be low-level formatted before you can use
your operating system’s partitioning and file preparation
utilities, such as MS-DOS
Fdisk
and
Format
.
Caution:
A low-level format destroys all data on the
drive. Be sure to back up your data before performing
this operation. You cannot abort a low-level format
once it is started. Therefore, do not turn power
OFF
to
abort this operation.
■
Verify Disk Media —Allows you to scan the media of a
hard disk drive for defects. If the utility finds bad blocks on
the media, it prompts you to reassign them; if you select
yes, those blocks are longer used. You can press Esc at any
time to abort the utility.