1-7
Introduction
Overview of the Installation Process
The following steps provide an overview of the process of
installing and configuring the ASA-7211 adapter:
1
Verify that your computer meets the requirements described in
System Requirements
on page 1-4
.
2
Gain familiarity with the contents of the Adaptec iSCSI
installation CD.
3
Install the Adaptec iSCSI adapter as described in
Chapter 2
.
4
Install the appropriate driver for your operating system as
described in
Chapter 3
.
5
Connect a Ethernet cable with the appropriate connector type
(either copper or fibre) and establish network connectivity
between your adapter and your targets.
6
Install the iConfig utility and use it to configure your network,
as described in
Chapter 4, Configuring Your iSCSI System
.
ASA-7211 IG.book Page 7 Tuesday, February 11, 2003 10:04 AM
