3-2
AHA-2940UW/OF and AHA-2944UW/OF User’s Guide
4
To verify the selection, type the following command at the
ok
prompt:
pwd
5
To view the configuration properties of any selected single-
chip host adapter, type the following command at the
ok
prompt:
.properties
6
To obtain firmware release and copyright information, type the
following at the
ok
prompt:
release
copyright
Executing the SCSI
Select
Utility
At the
ok
prompt enter the following command:
scsiselect
The first screen is the SCSISelect Options screen which displays
options, one line at a time. Two options are available to you:
■
Configure/View Host Adapter Settings
■
SCSI Disk Utilities
To select an option, use the
↑
and
↓
keys or Spacebar to display
the option, then press Enter. To exit SCSISelect, press Esc.
A screen similar to the one in Figure 3-1 appears:
Figure 3-1. SCSI
Select
Options Screen
AHA-294XU/UW/D
SCSISelect(R) Utility
v1.06
Copyright(c) 1996-1998 Adaptec, Inc. All rights reserved
------------------[
SCSISelect Options
]------------------
Do you wish to configure the host adapter or run the SCSI disk
{<Space> to select option <Enter> to accept option <Esc> to exit}
Select Option: [Configure/View Host Adapter Settings]
utilities?
